#1: Perform your repair.
#2: Once you are happy with it, remove any coarse scratches with 180 grit.
#3: Thoroughly degrease the area.
#4: Mask surrounding area.
#5: Treat bare metal areas with RAPTOR Etch Primer. Apply a High Build Automotive Primer if required.
#6: Once dried, unmask.
#7: Sand the repair area with 320 grit abrasive.
#8: Degrease with a solvent-based degreaser like Wipe#6 or System 20.
#9: Apply RAPTOR according to TDS.

Don’t miss out our TOP TIPS!