Raptor a Bumper
#1: Degrease the substrate with a water-based System 20 degreaser. #2: Abrade with 180-240 grit. #3: Degrease again. #4: Wipe the substrate with [...]
Raptor Bonnet and add a Stencil
#1: Spray the vehicle in the colour and texture of your choice. #2: Once fresh RAPTOR has cured, lay the stencil over the [...]
Repair Raptor
#1: We need to repair a dent in RAPTOR. #2: Take off the part which needs to be repaired if you can. #3: [...]
Achieve a Variety of Textures
Many textures can be achieved by changing the pressure, distance away from the panel or speed of application.
Personal Protective Equipment Needed
Personal protective equipment: latex or nitrile gloves, safety glasses, protective overalls and an appropriate spray mask suitable for automotive paint application.
Prepare Truck Bed
#1: Degrease to remove any contaminants, wax and grease #2: Abrade the entire truck bed with 120-180 grit or a nylon cup brush. [...]
Prepare Filler
#1: Perform your repair. #2: Once you are happy with it, remove any coarse scratches with 180 grit. #3: Thoroughly degrease the area. [...]
Prepare OEM Paint
#1: Begin by washing the surface with soap and water to remove organic contaminates. Thoroughly degrease the substrate with a solvent-based degreaser such [...]
Prepare Plastic with OEM Paint On
#1: Thoroughly wash with soap and water. Degrease the substrate with System 20 solvent or water borne degreaser. This removes any surface contaminants [...]
Prepare Bare Plastic
#1: Thoroughly degrease the substrate with a water-based System 20 degreaser. This removes any surface contaminants like grease, dirt and industrial fallout. #2: [...]