Prepare Plastic with OEM Paint On
#1: Thoroughly wash with soap and water. Degrease the substrate with System 20 solvent or water borne degreaser. This removes any surface contaminants [...]
Prepare Bare Plastic
#1: Thoroughly degrease the substrate with a water-based System 20 degreaser. This removes any surface contaminants like grease, dirt and industrial fallout. #2: [...]
Prepare Aluminium, Bare Metal, Galvanised Steel
#1: Thoroughly degrease the substrate with a solvent-based degreaser: U-POL WIPE#6 or System 20. This removes any surface contaminants like grease, dirt and [...]
Prepare Rust
#1: Remove all loose rust or flaky material with a coarse abrasive or a grinder. #2: Use a sander to remove any light [...]
Electric Multi Fill Machine – Instructions Video
Electric Multi Fill Machine Instructions Video
Electric Multi Fill Machine – How to change the Pump
Electric Multi Fill Machine - How To Change The Pump
Dolphin Speed Glaze video
Dolphin Speed Glaze is a premium fast curing glaze with snap cure technology that can cure up to 3 times faster than standard [...]
HeadStart Training Video 1 – Fillers
U-POL UK Headstart Training video showing the best tips and tricks on how to use our filler range and get the most out [...]
HeadStart Training Video 2 – Glazes
U-POL UK HeadStart Training video showing the best tips and tricks on how to use our glazes and get the most out of [...]