Home Prepare Bare Plastic

#1: Thoroughly degrease the substrate with a water-based System 20 degreaser. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade bare plastic with 180-240 grit.
#3: Any hard to reach areas should be abraded by hand with a fine scuff pad.
#4: Once abraded, thoroughly degrease again with a water-based degreaser.
#5: Wipe the substrate with a tack rag.
#6: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!