(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start': new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0], j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.data-privacy-src= 'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f); })(window,document,'script','dataLayer','GTM-5QX9XK5');
Document Library2023-08-23T10:57:34+00:00
TitleContentTagsLinkhf:doc_tags
Leak Stop TDSTDStds
MICF/200

Microfill

SDSsds
DOLMP/C3

Dolphin Multi

SDSsds
DOLMP/2

Dolphin Multi

SDSsds
DOLMD/C3

Dolphin Multi-Deep

SDSsds
DOLMD/2

Dolphin Multi-Deep

SDSsds
Dolma/C3 SDS

Dolphin Multi Advance

SDSsds
DOLMA/2 SDS

Dolphin Multi-Advance

SDSsds
RAPTOR High Heat Brochure
REFACE-TDSTDStds
https://u-pol.com/wp-content/uploads/U-POL_Terms-and-Conditions-of-Purchase_2016_EN.pdf
BAGDOLSG SDS EN

Dolphin SpeedGlaze SDS

SDSsds
ACID SDS ENSDSsds
ACIDAL SDS EN

ACID#8 1K Acid Etch Primer SDS

SDSsds
Z182 R SDS EN

ZINC 182 Rust Inhibiting Primer SDS

SDSsds
WIPEAL SDS EN

WIPE#6 Solvent-Based Degreaser SDS

SDSsds
WELDCAL SDS EN

WELD#2 Weld Through Primer SDS

SDSsds
WELDAL SDS EN

WELD#2 Weld Through Primer SDS

SDSsds
UPOLD SDS EN

U-POL D Aluminium Reinforced Body Filler SDS

SDSsds
UPOLB SDS EN

U-Pol B Glass Fibre Bridging Compound SDS

SDSsds
TRIMSTWAL SDS EN

TRIM#11 High Build Topcoat SDS

SDSsds
TRIMSLWAL SDS EN

TRIM#11 High Build Topcoat SDS

SDSsds
TRIMSBAL SDS EN

TRIM#11 High Build Topcoat SDS

SDSsds
TRIMMBAL SDS ENSDSsds
TRIMGWAL SDS EN

TRIM#11 High Build Topcoat SDS

SDSsds
TRIMGBAL SDS ENSDSsds
TIG W SDS EN

TIGER SEAL Polyurethane Sealant and Adhesive SDS

SDSsds
TIG G SDS EN

TIGER SEAL Polyurethane Sealant and Adhesive SDS

SDSsds
TIG B SDS EN

TIGER SEAL Polyurethane Sealant and Adhesive SDS

SDSsds
SRB TPO SDS EN

Stronghold 915 TPO Adhesive Hardener SDS

SDSsds
SRB SDS EN

Stronghold Adhesive Hardener SDS

SDSsds
SPOTAL SDS EN

SPOT#3 Universal Spot Primer SDS

SDSsds
SMCW SDS EN

SMC CARBON FIBRE REINFORCED FILLER – WHITE SDS

SDSsds
SMCB SDS ENSDSsds
SM7 SDS ENSDSsds
SH915 SDS ENSDSsds
SH904 SDS ENSDSsds
SH901 SDS ENSDSsds
SH706 SDS ENSDSsds
S20610 SDS ENSDSsds
S20600 SDS ENSDSsds
S2081EV SDS ENSDSsds
S2080SR SDS ENSDSsds
S2080 SDS ENSDSsds
S2046 SDS ENSDSsds
S2045 SDS ENSDSsds
S2044 SDS ENSDSsds
S2039EV SDS ENSDSsds
S2038EV SDS ENSDSsds
S2032 SDS ENSDSsds
S2030 SDS ENSDSsds
S2025W SDS ENSDSsds
S2025 SDS ENSDSsds
S2025BL SDS ENSDSsds
S2021W SDS ENSDSsds
S2021G SDS ENSDSsds
S2021BL SDS ENSDSsds
S2005EV SDS ENSDSsds
S2003 SDS ENSDSsds
S2002 SDS ENSDSsds
S2001 SDS ENSDSsds
S2000 SDS ENSDSsds
RPTEPAL SDS ENSDSsds
RPTAPAL SDS ENSDSsds
RPD MF SDS ENSDSsds
ROC SDS ENSDSsds
RLW SDS ENSDSsds
RLT SDS ENSDSsds
RLH SDS ENSDSsds
RLB SDS ENSDSsds
RLBAL SDS ENSDSsds
REP SDS ENSDSsds
REPH SDS ENSDSsds
REPAL SDS ENSDSsds
REFACE SDS ENSDSsds
PLASTIKIT SDS ENSDSsds
PLASTIKITHRD SDS ENSDSsds
PLASB2 SDS ENSDSsds
PLASB1 SDS ENSDSsds
PLASA1 SDS ENSDSsds
PLAS6 SDS ENSDSsds
PLAS5SB SDS ENSDSsds
PLAS5MG SDS ENSDSsds
PLAS5LG SDS ENSDSsds
PLAS5DG SDS ENSDSsds
PLAS5B SDS ENSDSsds
PLAS5BG SDS ENSDSsds
PLAS4F SDS ENSDSsds
PLAS4C SDS ENSDSsds
PLAS3 SDS ENSDSsds
PLAS3HB SDS ENSDSsds
PLAS2 SDS ENSDSsds
PLAS1 SDS ENSDSsds
PCSBAL SDS ENSDSsds
PCPGAL SDS ENSDSsds
PCMBAL SDS ENSDSsds
PCLCAL SDS ENSDSsds
PCGWAL SDS ENSDSsds
PCGBAL SDS ENSDSsds
PCEPAL SDS ENSDSsds
P88 SDS ENSDSsds
MXMH SDS ENSDSsds
MXMCL SDS ENSDSsds
HIGHWAL SDS ENSDSsds
HIGHVBKAL SDS ENSDSsds
HIGHGAL SDS ENSDSsds
HIGHDGAL SDS ENSDSsds
HARSF2 SDS ENSDSsds
GUIDEAL SDS ENSDSsds
GUARDAL SDS ENSDSsds
GRIPAL SDS ENSDSsds
GREYSTRIPE SDS ENSDSsds
GRANB1 SDS ENSDSsds
GRAGG1 SDS ENSDSsds
GRABW1 SDS ENSDSsds
FISH SDS ENSDSsds
FIB SDS ENSDSsds
FANT F SDS ENSDSsds
FANT D SDS ENSDSsds
EASY3 SDS ENSDSsds
EASY2 SDS EN
DOLSTTU SDS ENSDSsds
DOL SDS ENSDSsds
DOLBF M SDS ENSDSsds
CLEARAL SDS ENSDSsds
CCWPAL SDS ENSDSsds
CCUPAL SDS ENSDSsds
CCFOWPAL SDS ENSDSsds
CCFOUPAL SDS ENSDSsds
BPO SDS ENSDSsds
BLENDAL SDS ENSDSsds
BAR SDS ENSDSsds
Raptor Tinting Recommendations with Axalta’s Tints
MXMFH SDS ENSDSsds
SMCB SDS UKSDSsds
RPD MF SDS UKSDSsds
HOT1 G SDS UKSDSsds
EASY3 SDS UKSDSsds
UPEGF SDS UKSDSsds
TOPG SDS UKSDSsds
TOPG SDS ENSDSsds
HeadStart Training Video 5 – Premium Aerosols

For privacy reasons YouTube needs your permission to be loaded. For more details, please see our Privacy Policy.

 

U-POL Premium Aerosols are a comprehensive range consisting of 11 industry leading products, ideal for spot/panel and SMART applications. Special clog-free nozzles give a spray gun like finish to every job.

 

View Premium Aerosol Range

UPEGF SDS ENSDSsds
RPD MF SDS ENSDSsds
HOT1 G SDS ENSDSsds
EASY3 SDS ENSDSsds
TOPG US SDS ENSDSsds
TOPG SDS ENSDSsds
SMCB US SDS ENSDSsds
SMCB SDS ENSDSsds
RPD MF US SDS ENSDSsds
Quality Policy
RAPTOR Commercial Brochure
HeadStart Training Video 4 – Speciality Fillers

U-POL has a great range of Speciality Fillers. This video shows off the benefits of U-POL B Glass Fibre Bridging Compound.

U-POL B is a strong polyester glass fibre filler that can be easily shaped and sanded once cured. Suitable for bridging holes and rust in steel and GRP surfaces.

Other fillers in the U-POL Speciality Fillers range include:

U-POL Fibral Glass Fibre Repair Filler – Two component sandable fibreglass filler which takes the place of short and long strand products. Ideal for bridging holes while providing a tough, resistant GRP coating.

U-POL SMC Carbon Fibre Reinforced Filler – High adhesion bonding paste and filling compound specifically designed to repair cracks, holes and scratches in SMC, fiberglass, composite and other rigid materials.

Maximum Clearcoat

 

A high solids, 2:1 clearcoat that delivers a crystal clear finish with superior gloss retention. It’s easy to apply with excellent flow and non-sag properties. Gives a durable, UV and scratch resistant finish. Ideal for all types of paintwork applications.

Maximum

  • Easy to apply
  • Crystal clear finish with superior gloss retention
  • Excellent flow and non-sag properties
  • Water white
  • Durable and scratch resistant
  • Ideal for small and large repairs in various conditions
Сферы Применения RAPTOR 2020
Сферы Применения RAPTOR
Рекомендации По Смешиванию Грунтов U POL SYSTEM 20
Листовка Результаты Испытаний
Листовка По Системе Серых Оттенков Грунтов U POL Grey Shade SYSTEM
Листовка RAPTOR Защита От Уф Излучения
Инструмент Подбора_Система Серых Оттенков Грунтов U POL Grey Shade SYSTEM
Брошюра Укрывистость Индикативный Расход RAPTOR
Imprimaciones y Transparentes

Aerosoles Premium Parte II

Pastas Especiales Reparadorde plásticos

Reparacion SMART

Rellenos y Masillas

Raptor Usos Alternativos

Productos Raptor

Pastas Especiales Fibrade Vidrio

Latas de Aerosoles Para Llenar

Aplicación Raptor

Velocidad Rellena y aplicael fondo

Aparejo Epoxi RAPTOR 2K

Imprimación Fosfatante Agarre

Raptor Acid Etch Primer in Aerosol – Prepare Your Substrate before Applying RAPTOR.

Promotor De Adherencia RAPTOR

Why RAPTOR

We compiled the main reasons you should go for Raptor Protective Coating! So are you going for Black? or Tintable? Share your projects on our picture gallery.

Pistola Con Boquilla Ajustable

Lograr Une Variedad De Texturas

Se pueden lograr muchas texturas cambiando la presión, la distancia del panel o la velocidad de aplicación.

Hacer Un Parachoques

PASO #1: Desengrase la superficie con un desengrasante System 20 a base de agua.
PASO #2: Lije con grano 180-240.
PASO #3: Desengrase de nuevo.
PASO #4: Limpie la superficie con un paño.
PASO #5: Después de 20 minutos, estás listo para disparar a RAPTOR.

Hacer Un Chasis

PASO #1: Elimine la mayor cantidad de óxido y escombros posible con un abrasivo grueso o amoladora.
PASO #2: Desengrase con un desengrasante a base de solvente como WIPE#6 o System 20.
PASO #3: U-POL recomienda 2-3 capas de Aparejo Epoxi para una máxima protección anticorrosiva.
PASO #4: Permita 10 minutos entre capas.
PASO #5: Cuando curado, aplique RAPTOR. Puede aplicarse húmedo sobre húmedo (sin lijar) en 1 hora.

Aplicar Raptor Sobre Ruedas

PASO #1: Retire la rueda del vehículo.
PASO #2: Use una lavadora de presión para limpiar la rueda. Elimine toda la suciedad, mugre y polvo de ambos lados.
PASO #3: Retire todos los pesos de las ruedas unidos a la rueda.
PASO #4: Cinta los vástagos de las válvulas para que no queden atrapados con Raptor en el proceso de aplicación..
PASO #5: Desengrase para eliminar el alquitrán de la carretera, los contaminantes y los residuos de aceite.
PASO #6: Lije con papel de lija de grano 180-220 y una almohadilla roja, llegando al OEM.
PASO #7: Use una almohadilla de desgaste roja para entrar en todas las áreas de contorno de la rueda.
PASO #8: Sople y vuelve a limpiar con desengrasante.
PASO #9: Use pequeños piezas de cinta de 1 1/2 – 2 “para enmascarar el neumático y protegerlo de la sobrepulverización. Continúe el proceso de enmascaramiento alrededor de los bordes exteriores de la rueda.
PASO #10: Para protección contra la corrosión y adhesión adicional, use un aparejo. Recomendamos 2 capas de Aparejo Epoxi Anticorrosivo 2K (UP4842) o ACID # 8 Negro (UP0873) o Gris (UP0741V). Cubre cualquier área donde haya quedado expuesto el metal expuesto.
PASO #11: Aplique una primera capa de Raptor @ 55 PSI y aproximadamente 32 “de la superficie.
PASO #12: Aplique la segunda capa en un ángulo de 45°, opuesto a la primera pulverización.

Spray A Una Cama De Pick Up

PASO #1: Asegúrese de aplicar una capa uniforme, evitando la acumulación excesiva en las esquinas.
PASO #2: Para la primera capa, configuramos la pistola RAPTOR a 50-60 PSI, a 20 pulgadas de la superficie.
PASO #3: Para garantizar una aplicación uniforme, sube la presión a 65-70 PSI, a 25 pulgadas para la segunda capa.
PASO #4: Una vez seco, el vehículo puede ser desenmascarado cuidadosamente.

Reparar RAPTOR

PASO #1: Necesitamos reparar una abolladura en RAPTOR.
PASO #2: Quite la parte que necesita reparación si puede.
PASO #3: Golpea el panel el la area abollada, para que el panel sea mas facil de reparar.
PASO #4: Desengrase completamente el área a reparar antes de lijar.
PASO #5: Retire RAPTOR del área dañada con abrasivo de grano 80 a 120.
PASO #6: Sople completamente el área y desengrase de nuevo.
PASO #7: Aplique la masilla al área dañada.
PASO #8: Lije para darle forma cuando esté seco con grano 120 para comenzar y terminar con grano 180.
PASO #9: Lije el área circundante que se va a recubrir con una fina almohadilla y desengrase.
PASO #10: Cualquier área de metal expuesto debe tratarse con un aparejo adecuado.
PASO #11: Aplique una capa ligera de Promotor de Adherencia RAPTOR sobre el área que ha sido desgastada con una almohadilla de desgaste para una adhesión óptima.
PASO #12: Aplique una capa ligera de RAPTOR sobre el área de reparación para lograr la textura requerida.
PASO #13: Si usa el aerosol RAPTOR 2K, espere 30 minutos y aplique una segunda capa uniforme para lograr una reparación uniforme. Si usa una pistola, espere 1 hora.

Mezclar Kits Negro

PASO #1: Agite la botella negra Raptor.
PASO #2: Para el kit de 1 cuarto, vierta todo el contenido del endurecedor en la botella RAPTOR.
PASO #3: Para el kit de 1 galón, Use la copa mezcladora provista.
PASO #4: Reemplaza la tapa y agite durante 2 minutos.
PASO #5: Atornille la pistola de aplicación en la botella RAPTOR.

Tintar Con Color Sólido 2K

PASO #1: Agite bien la botella Raptor.
PASO #2: Para el kit de 1 cuarto, vierta todo el contenido del endurecedor en la botella RAPTOR. Para el kit de 1 galón, vierta RAPTOR tintable en una taza mezcladora.
PASO #3: Vierta el endurecedor hasta la línea de medición en la taza de mezcla (8 onzas líquidas de endurecedor por 24 onzas líquidas de RAPTOR).
PASO #4: Luego vierta el endurecedor en la botella RAPTOR.
PASO #5: Vuelva a colocar la tapa y agite nuevamente para eliminar cualquier exceso de RAPTOR que quede en la botella.
PASO #6: Active su pintura 2K con su propio endurecedor.
PASO #7: Usando una taza mazcladora, agregue un máximo del 10% de su color sólido activado por volumen.
PASO #8: Agregue su tinte preactivado al RAPTOR.
PASO #9: Mezclar todo por 2 minutos.
PASO #10: Una vez bien mezclado, vierta nuevamente en la botella.
PASO #11: Agite de nuevo.

Tintar Con Bolsillas De Colores

#1: Shake the Raptor tintable bottle thoroughly.
#2: Pour the entire content of the pouch in the Raptor bottle or a mixing cup.
#3: Pour the hardener up to the measuring line in the mixing cup (8 fl. oz. of hardener for 24 fl. oz. of Raptor).
#4: Then pour the hardener in the Raptor bottle.
#5: Replace the lid and shake again for 2-3 mins to ensure residue of untinted Raptor from the bottle is removed.
#6: Mix RAPTOR Color with the RAPTOR Tintable Base and hardener to give a rich, UV resistant color that won’t fade even after years in the sun.

Don’t miss out our TOP TIPS!

Mezclar Kits Negros RAPTOR

#1: Shake the Raptor black bottle thoroughly.
#2: For the 1 Bottle Kit, pour the full contents of the hardener into the RAPTOR bottle.
#3: For the 4 Bottle Kit, use the mixing cup provided.
#4: Replace lid and shake for 2 mins.
#5: Screw the application gun onto the RAPTOR bottle.

Don’t miss out our TOP TIPS!

Masilla Para Plásticos Flexibles 7061

UP7061 FLEXIBLE PLASTIC FILLER can be used for cosmetic and structural repairs.

  • Get 3X as much product with UP7061 as a 6 oz two-part adhesive cartridge for the same price
  • Save time and money by eliminating the need for an adhesion promoter*
  • You get two products in one! Mix product like a conventional filler and apply for cosmetic repairs or use with mesh tape for structural repairs or plastic welding
  • You don’t have to heat treat plastic before application like other plastic repair products which reduces the risk of warping vehicle bumpers.
Dolphin Finishing Putty – Beneficios y Ventajas

Flyweight – Beneficios y Ventajas

Mezclar Masilla y Reducir Porosidad

Many of the pinholes we deal with come from the way that we mix the filler itself. A little technique… Take the spreader and form it in a sort of C shape position, place it perpendicular to the mixing board and make a figure 8 sign. You can see how the activator is picked up and move directly into the filler. This doesn’t introduce any external air into the filler. Do this for about 30 seconds, then pick the filler up, press it out. If you still see the hardener through the paste, simply pick the product up again, run the figure 8 for another few seconds. Then pick the filler up and press it down again.

You can find out more about the Dolphin One Fill Premium Body Filler which features in this video here or to you can learn more about the U-Pol Onion Board here.

Preparar Plástico Expuesto
Preparar Plástico Con Pintura OEM
Preparar Pintura OEM
Preparar Oxido
Preparar Masilla
Preparar Aluminio Metal Expuesto Y Acero Galvanizado
Preparar Una Cama De Pick Up
2021 U-POL Catalog
Dolphin Fillers Brochure
2021 RAPTOR Catalog
Performing a Complete Repair 1

This video will be the first of a three-part series that covers how to perform a complete repair with U-POL’s line of fillers, glazes and coatings.

Liteweight Gold Filler:

  • Is pinhole-resistant, and features a smooth, creamy formula, that makes it easy to spread and sand
  • Liteweight Gold has excellent direct-to-metal adhesion, and offers the versatility of a non-sagging formula combined with superior filling properties so it’s perfect for small to deep repairs, whether on horizontal OR vertical surfaces

*Suitable substrates include OEM paint surfaces, aluminum, galvanized, SMC, fiberglass, lightly abraded E-Coat and most plastics

Dolphin Glaze:

  • A direct-to-metal product with excellent adhesion to multiple substrates.
  • It’s solvent-proof in 20 minutes so you save time over other brands on the market and can start priming and painting faster.
  • It’s also pinhole-free and easy to apply.
  • Dolphin Glaze is specifically designed for lighter repairs, making it the perfect solution for pinholes and sand scratches, and other minor imperfections

*Suitable substrates include properly prepared OEM paint surfaces, aluminum, galvanized, SMC, fiberglass, lightly abraded E coat, most plastics.

Performing a Complete Repair 2

This video is the second of a three-part series that covers how to perform a complete repair with U-POL’s line of fillers, glazes and coatings.

The first part of this series demonstrated how to properly prepare a surface with U-POL Liteweight Gold Lightweight Body Filler and Dolphin Ultra Fine Finishing Glaze. Available here!

In this video we will be focussing on our System 20 Primer and Clearcoats which utilize the same set of hardeners so it’s an extremely easy system to use.

System 20 High Build Primer:

  • Can be used for spot repair and large panels
  • Features excellent build and surface leveling properties
  • Is easy to sand, wet or dry
  • Can be applied directly to metal, over most plastics, over un-sanded E-Coat, and properly prepared aluminum and galvanized substrates
  • It’s tintable with up to 10% urethane mixing base
  • AND it’s available in both National Rule and low VOC formulations, in both gallon and quart sizes
Performing a complete Repair 3

The first two parts of this series highlighted how to properly prepare a repair surface with U-POL Liteweight Gold Lightweight Body Filler and Dolphin Ultra Fine Finishing Glaze, and then prime with System 20 High Build Primer.

This video will look at our System 20 clearcoat line.

U-POL’s System 20 primers and clearcoats utilize the same set of hardeners so it’s an easy and convenient system to use. The U-POL System 20 primers and clearcoats are available in both National Rule and low VOC formulations, offering superior performance that suits virtually any shop condition. Our System 20 Clearcoats are also available in 4:1 and 2:1 mix ratios, so you have options with different speeds of hardener to suit your preference and type of job. Today I will complete our repair with one of our 4:1 System 20 clearcoats, UP2882 Universal Clearcoat.

Repairing Metal Substrates

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

Our distributors have supported us over the years by promoting our products in the market. In 2021 our mission is to return the favor, by increasing our marketing spend and commitment in the market, to help drive sales for you.

We’re making a substantial investment in media to support our brands with partnerships in relevant publications, including Babcox – one of the biggest the biggest trade media platforms in NAM.

With this new partnership – we will be promoting 24 ‘How To’ videos over 12 months starting with this “Repairing Metal Substrates” video above. Free for you to download for your own sales team or as an instructional guide!

The first video is also now Live now on bodyshopbusiness.com and counterman.com.

In addition to our media expansion, all of our cross-platform campaigns will be formatted for our customers to use on their websites and social media, to maximize our exposure and support sales conversions. Keep an eye out for breaking product support news over the months ahead. This is an exciting time to be a UPOL partner!

Featured Products

High#5 High Build Primer

Wipe#6 Solvent Based Degreaser

Guide#7 Dry Guide Coat

Acid#8 Acid Etc Primer

Fill-One Custom Can Filling Machine

If you want to be kept up to date on all new video releases be sure to sign up to our mailing list and we’ll keep you informed when new videos are released!

Performing a Rocker Panel Smart Repair

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

Here we have part two of our four part series covering U-POL’s premium line of aerosols completely free for you to downloand.

We’ll be looking at how different products in the range can quickly and easily help you to repair a rocker panel, saving you time and increasing productivity.

Featured Products in this video

WIPE#6 – Fast evaporating, solvent based, anti-silicone degreaser that won’t attack existing painted surfaces. Removes surface contaminants like wax, grease and silicones.

ACID#8 – Promotes paint adhesion to difficult surfaces like galvanized steel and aluminim. Creates an anti-corrosive barrier that prevents steel from rusting and can be used to etch and prime bare metal in one step!

GUARD#10 – A textured, durable coating that bonds directly to bare metal and properly prepared aluminum and galvanised surfaces. Protects against stone chips, salt, moisture and rust. The high-build formula is ideal for covering weld marks and high seams and is a great sound deadener in body panels and engine compartments.

Can be immediately top coated saving you time!

CLEAR#1 provides an excellent high gloss finish and depth for seamless repairs with fast drying for increased productivity. It is UV resistant and ideal for spot repairs like fenders, bumper covers, mirror covers and mouldings,

U-Pol’s Pre-gassed Cans are ready to be filled with 100ml of solvent-based or waterborne paint and produce a clog-free, spray gun like application. View the range of available filling machines here.

Matching OEM E-Coat

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

Here we have part three of our four part series covering U-POL’s premium line of aerosols completely free for you to downloand. Our distributors have supported us over the years by promoting our products in the market. In 2021 our mission is to return the favor, by increasing our marketing spend and commitment in the market, to help drive sales for you.

E-COAT#12 is a corrosion resistant, color matched coating that restores the original appearance and gloss of factory ecoat. Use E-COAT #12 on any e-coated panel, vehicle floor, engine bay, cross members, core supports, door skins. ECOAT #12 can be used as a DTM primer or as a single coating to match the OEM finish, is available in 5 colors and is compatible with most basecoats.

  • Excellent color and gloss match to OEM factory coatings
  • 1-2 coat application
  • Apply direct to metal, no need for etch primer 20 – 30 minutes
  • Contains a unique corrosion resistant technology

If you want to be kept up to date on all new video releases be sure to sign up to our mailing list and we’ll keep you informed when new videos are uploaded.

Restoring and Repairing Plastic Parts

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

This is the last of a four-part series which covers U-POL’s Premium Line of Aerosols. If you haven’t yet seen the other videos they are linked below.

In this video we look at how to perform two types of repairs. Firstly how to restore a piece of faded trim using our TRIM#11 aerosol series, followed by repairing a plastic bumper, that will require only 4 aerosols.

Featured products in the video include;

TRIM#11 HIGH BUILD TOP COAT – Restores original appearance to body panels, under hood, chassis and wheels.

GRIP#4 UNIVERSAL ADHESION PROMOTER – GRIP#4 promotes paint adhesion to most automotive surfaces, like plastics, metal, zinc, painted surfaces, fiberglass and body fillers. It sprays flat and provides a protective barrier against lifting or solvent attack.

SPOT#3 UNIVERSAL SPOT PRIMER – SPOT#3 is a multi-function, fast drying primer that’s ideal for small rub through and localized repairs.

CLEAR#1 ADVANCED 1K CLEARCOAT – CLEAR#1 gives an excellent high gloss finish and excellent depth for a seamless, well-blended repair in a convenient aerosol.

Dolphin Glazes and Putties

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

U-POL offers a comprehensive line of fillers, putties and glazes that offer both quality and performance.

These products utilize the latest advancements in resin technology to give you the perfect results, every time.

  • UP0658 Dolphin Ultra Fine Finishing Putty and UP0714 Dolphin Ultra Fine Finishing Glaze are made from the same resin system so the products can be used interchangeably depending on the level of damage and preference of the user.
  • Both products are easy to sand, and can be primed in 20 minutes or less!
  • Both products can be applied directly to metal, prepared OEM paint surfaces, aluminum, galvanized, SMC, fiberglass and lightly abraded E-Coat, AND most plastics
  • UP0658 Dolphin Putty is ideal for repairing rock chips or door dings, and features lightweight technology with excellent filling properties so it’s a quick fix for these types of applications.
  • UP0714 Dolphin Glaze, as demonstrated in this video, is designed for minor surface scratches and imperfections and is completely self-leveling.
Dolphin Speed Glaze

Our mission for supporting you in 2021: LET’S DO THIS RIGHT FROM THE START

U-POL offers a comprehensive line of fillers, putties and glazes that offer both quality and performance.

These products utilize the latest advancements in resin technology to give you the perfect results, every time.

Dolphin Speed Glaze is an advanced, lightweight, ultra-fast curing finishing glaze specially formulated to repair scratches, stone chips and pinholes. Using “Snap Cure” technology, it cures up to 3 times faster than a standard glaze.

  • Up to 3 x faster curing (6-8 minutes at 68 F)
  • Solvent impervious
  • Excellent pinhole and scratch filling properties
  • Effortless sanding
  • Ultra-fine finish
  • Self-leveling

Also featured in this video is WIPE#6 Solvent Based Degreaser.

UP7061-U-POL-Bumper-Filler

U-Pol 7061

Skip the gun, cartridge and tip and switch to U-POL 7061. Fix road rash, hole throughs, and other flexible repairs with 7061 Flexible High Density Body Filler. Versatile enough to use on a variety of substrates, and specially designed for flexible plastics.

  • Solvent proof in 15-20 minutes
  • Ideal for repairing bumpers – feather edges perfectly into plastic and dries very flexible
  • Can be used with mesh for hole through and tab repairs
  • Fast drying and very easy to sand
Cosmetic Repairs with UP7061

Lets look at how you make also make cosmetic repairs with our UP7061 and a handful of other U-POL products.

Packaged in a 3 liter container, you get 3 times as much product with UP7061 versus two-part cartridge systems on the market.

UP7061 mixes and applies like a standard filler, so you can skip the gun and static mixers, and get onto to fixing road rash, deep gouges and holes in flexible parts, quickly and easily.

Check out our UP7061 Bumper Filler here.

Specialty Fillers Part 1 – U-POL D

This video is the first of a three-part series, which covers U-POL’s Specialty Fillers.

U-POL D is a versatile, direct-to-metal formula with high adhesion across a multitude of substrates.

It’s aluminum-reinforced, and contains aluminum flakes so it’s perfect for restoration or classic car work, or ANY application requiring medium to deep amounts of filler.

  • Unlike competitive metallic fillers that require a special MEYK liquid hardener, UPOL-D uses the same crème hardeners that all U-POL fillers require.
  • These crème hardeners are available in two colors, red and blue, and can be ordered separately for convenience.
  • U-POL D’s formula is non-shrinking, smooth-spreading, and has excellent filling properties.
  • It’s easy to sand, and is ready to sand, in 15-20 minutes!
  • Find out more about U-POL D here.
Specialty Fillers Part 3 – SMC

U-POL’s SMC High Adhesion Filler:

  • Is a direct-to-metal, high adhesion bonding and filling compound that’s specifically designed for the rapid repair of cracks, holes and scratches in virtually ALL substrates, including:
  • SMC
  • Fiberglass,
  • Composites, and
  • Other Rigid Materials.
  • Its carbon fiber-reinforced formula provides structural strength to repairs, making it one of the strongest fillers on the market!
  • SMC is designed with extra-long fiber strands, which makes it ideal for filling and shaping medium- to deep-panel damage on trucks, recreational vehicles, rail vehicles, and marine craft
  • SMC cures in only 15-20 minutes, and can be used to coat and restore an original finish
  • SMC is available in two colors – white and black, and is packaged in one-liter cans.
Specialty Fillers Part 2 – Fibral Lite

U-POL offers a variety of direct-to-metal premium body fillers, specialty fillers, glazes and putties that can be used in a variety of applications and industries.

This video demonstrates our Fibral Lite Lightweight Sandable Fiberglass Filler. With Fibral Lite, you get two products in one!

Fibral Lite is two products in one, because it spreads like a short strand, but bridges holes like a long strand, so there’s no need to stock two different products!

Fibral Lite:

  • Can be applied directly to metal, steel, plastics and is specially formulated for fiberglass, which I will show today
  • Fibral Lite is a durable, yet lightweight formula that can easily be shaped and sanded, once cured
  • Unlike the competition, Fibral Lite is completely waterproof whereas leading competitors’ brands are not!
  • Competitive brands must be top-coated with another filler before it is waterproof, so you must use an extra product to waterproof, which means more money and more time spent on your repair
  • Also, Fibral Lite won’t sag, even on vertical surfaces – it spreads, adheres and finishes like a polyester filler
Fill and Prime in Record Time

Our Dolphin Premium All-in-One Filler and our RAPID SYSTEM Primer – which will allow shops to fill and prime in as little as 30 minutes!

U-POL’s Dolphin Premium All-in-One Filler:

  • Builds like body filler yet is incredibly smooth and pinhole-free so you can skip the glaze
  • It allows you to fill and glaze with the same product so there are less SKUs to buy
  • It’s direct to metal with industry leading adhesion to more substrates
  • It features outstanding vertical hold
  • It’s faster to sand – typically sands in 14 minutes at 70˚F, and it also sands to a fine powder that won’t clog sandpaper
  • Dolphin One Fill featheredges and won’t roll back
  • It’s solvent-proof in 20 minutes so it’s faster to prime
  • AND it’s available in gallons and quarts

U-POL’s Rapid System Primer:

  • Is 74% solids, which can produce up to a 4-mil build in just one to two coats
  • It offers a broad application range, making it ideal for both spot and multi-panel repairs depending on the ambient temperature
  • Rapid System Primer is gray in color, but can be tinted up to 10% with basecoat for the ultimate color match
  • It features an easy 4:1:1 or 4:1:2 mix ratio that can be modified for build, and it only utilizes one hardener for easy inventory management
  • Rapid System Primer SANDS in less than 1 hour!, which cuts down on the time to get to painting
  • And it’s available in both National Rule and low VOC formulations
Dolphin Speed Glaze and Rapid System Primer

U-POL understands that time is of the essence in a body shop. We understand how important it is to use products and processes that will help save you time and money so your operation can run as effectively AND efficiently as possible.

This video will focus on two products, our Dolphin Speed Glaze and our RAPID SYSTEM Primer.

Dolphin Speed Glaze is designed with the autobody repair technician in mind:

  • Its semi-flexible formula dries and powders fast, which translates into reduced cycle times and extra profits
  • Dolphin Speed Glaze cures in 8-10 minutes, and can be primed in as little as 15 minutes!
  • It is also our softest sanding glaze, and features an advanced, lightweight formulation, which is ideal for repairing small scratches, minor dents, chips, and surface imperfections
  • And even though it’s pourable, Dolphin Speed Glaze still hangs on well to vertical surfaces.
  • Dolphin Speed Glaze can also be applied directly to metal, and is compatible with galvanized metal, plastics, fiberglass and properly abraded E-Coat surfaces.
  • And for the ultimate in fast cycle times, we recommend using Dolphin Speed Glaze in combination with U-POL’s Rapid System Primer.

RAPID System Primer:

  • RAPID SYSTEM Primer is 74% solids!, which can produce up to a 4-mil build in just one to two coats!
  • It offers a broad application range, making it ideal for both spot and multi-panel repairs, depending on the ambient temperature
  • It’s gray in color, but can be tinted up to 10% with basecoat for the ultimate color match
  • RAPID SYSTEM Primer also features an easy 4:1:1 or 4:1:2 mix ratio that can be modified for build, but only uses one hardener for easy inventory management
  • And finally, RAPID System Primer sands in less than 1 hour so you can quickly get on to painting!
The Perfect Finish Part 1 – System 20 Primers

The U-POL System 20 line of primers and clearcoats offer superior performance and suit virtually any shop condition.

System 20 Primers and Clearcoats are available in both National Rule and low VOC formulations, AND they conveniently use the same set of hardeners.

Our System 20 High Build Primer offers the functionality of “3 products in 1,” depending on how they are mixed. Mix 4:1 for a primer filler, 4:1:1 for a primer surfacer or 4:1:2 as a primer sealer.

System 20 High Build Primer:

  • It can be used for both spot and large panel repairs
  • It features excellent build and surface leveling properties
  • It’s easy to sand – wet, or dry
  • It can be applied directly to metal, un-sanded E-Coat, properly prepared aluminum, galvanized substrates, and most plastics
  • It can also be tinted up to 10% with a urethane basecoat
  • And it is available in both gallons and quarts
  • Our System 20 Primers are also available in white, black and gray colors
The Perfect Finish Part 2 – System 20 Clearcoats

U-POL’s System 20 line of primers and clearcoats offer superior performance and suit virtually any shop condition.

The System 20 Primers and Clearcoats are available in both National Rule and low VOC formulations, AND they conveniently use the same set of hardeners.

In addition to sharing the same hardeners as our System 20 Primer line, it’s available in both low VOC and National Rule formulations. Our System 20 Clearcoats are also available in 4:1 and 2:1 mix ratios to suit your application preference.

For the purposes of this demonstration, I will continue our repair from part one of this series using our UP2872V System 20 Low VOC 4:1 Water Clearcoat. View that video here.

UP2872V System 20 Low VOC 4:1 Water Clearcoat:
• Is made from high quality, European resins
• It has excellent flow, which makes it easy to apply, sand and buff
• UP2872V has outstanding gloss and features excellent UV resistance, weather, scratch and abrasion resistance
• It’s specially formulated for overall and multi-panel repairs, and can be air dried or low baked (130˚F – 140˚F)
• And lastly, it’s compatible with most waterborne and solvent-based basecoats

Tiger-Seal

Tiger Seal is a direct-to-metal, moisture-cured polyurethane sealant and adhesive that is ideal for a variety of automotive, marine and industrial applications.

It bonds directly to steel, aluminum, brass, iron, fiberglass, most plastics, glass, and even wood and ceramics!

Tiger Seal is a convenient, ready-to-use one-component product that fits a standard caulking gun, and can be used to seal around windows, doors and lights.

Tiger Seal is available in three colors – white, black and gray, and is compatible with most waterborne and solvent-based basecoats on the market.

Smart Repair

Supporting Videos



Premium Aerosols – Part 2

Supporting Videos

Raptor Application

Supporting Videos

Specialty Filler Plastic

Supporting Videos


Specialty Fillers Fiberglass

Supporting Videos


Raptor Products

Supporting Videos

 

Raptor Alternative Uses

Supporting Videos



Primers and Clears

Supporting Videos

Premium Aerosols

Supporting Videos



Fillers, Putties and Glazes

Supporting Videos

Fast Fill and Prime

Supporting Videos

Custom Cans

Supporting Videos



Cosmetic and Semi Structural Plastic Repairs With Fewer Products

New Raptor 1K Aerosol – Auto

New Raptor 1K Aerosol – DIY

2K Aerosol Epoxy Primer

2K Bedliner Aerosols

Features and Application

RAPTOR Wheel Coating

Learn how to apply RAPTOR on your Wheels. For best results on bare metal first apply RAPTOR Anti-Corrosive Epoxy Primer.

Tint with Color Pouches

#1: Shake the Raptor tintable bottle thoroughly.
#2: Pour the entire content of the pouch in the Raptor bottle or a mixing cup.
#3: Pour the hardener up to the measuring line in the mixing cup (8 fl. oz. of hardener for 24 fl. oz. of Raptor).
#4: Then pour the hardener in the Raptor bottle.
#5: Replace the lid and shake again for 2-3 mins to ensure residue of untinted Raptor from the bottle is removed.
#6: Mix RAPTOR Color with the RAPTOR Tintable Base and hardener to give a rich, UV resistant color that won’t fade even after years in the sun.

Don’t miss out our TOP TIPS!

Quick & Easy Headlight Restoration

Repair a Hole in a Bumper

7061 Flexible Plastic Filler

UP7061 FLEXIBLE PLASTIC FILLER can be used for cosmetic and structural repairs.

  • Get 3X as much product with UP7061 as a 6 oz two-part adhesive cartridge for the same price
  • Save time and money by eliminating the need for an adhesion promoter*
  • You get two products in one! Mix product like a conventional filler and apply for cosmetic repairs or use with mesh tape for structural repairs or plastic welding
  • You don’t have to heat treat plastic before application like other plastic repair products which reduces the risk of warping vehicle bumpers.
Tiger Seal – Features and Benefits

Guard #10 – Features and Benefits

E-Coat #12 – Features and Benefits

Aerosol Primer Line

Acid #8 – Features and Benefits

High #5 – Features and Benefits

Mix Filler and Reduce Pinholes

Many of the pinholes we deal with come from the way that we mix the filler itself. A little technique… Take the spreader and form it in a sort of C shape position, place it perpendicular to the mixing board and make a figure 8 sign. You can see how the activator is picked up and move directly into the filler. This doesn’t introduce any external air into the filler. Do this for about 30 seconds, then pick the filler up, press it out. If you still see the hardener through the paste, simply pick the product up again, run the figure 8 for another few seconds. Then pick the filler up and press it down again.

You can find out more about the Dolphin One Fill Premium Body Filler which features in this video here or to you can learn more about the U-Pol Onion Board here.

Flyweight Features and Benefits

Fibral Lite Features and Benefits

Features and Benefits

Dolphin Finishing Putty – Features and Benefits

Repair a torn Bumper Tab

Raptor Coatings Tints and Additives

This video will focus on the types of RAPTOR tints and additives that are available.

First we look at our National Rule 2K Tintable RAPTOR with one of our 15, high strength color pouch additives.

If you prefer to use toners from your own mixing bank, that is fine too — We recommend using our color pouches if you’re looking for a fast and easy quick way to get high strength, vibrant colors.

We’ll also be looking at our UP4800 Traction Control. Our RAPTOR Traction Control Additive has anti-skid properties, which is perfect for surfaces that will be walked on.

Raptor Coatings Aerosols

This video will be the third of a five-part series, which covers the RAPTOR Protective Coatings System by U-POL and we’ll be looking at the Raptor Aerosol Range.

RAPTOR offers 1K preparation aerosols, which work well with either our RAPTOR kits or RAPTOR Aerosols:

  • Acid Etch Primer is recommended for smaller exposed surfaces and allow you to etch and prime bare metal in one step, and
  • 1K Adhesion Promoter, which is recommended for flexible plastics and hard to sand areas.

In the 2K Aerosol range we offer:

  • Epoxy Primer, which works well as a protective, anti-corrosive primer in larger exposed surfaces, and
  • Seven 2K RAPTOR color aerosols, which can be used for small, overall jobs or touch ups to existing RAPTOR-sprayed surfaces, which is particularly useful if your shop is set up as a certified RAPTOR Application Center

The convenient RAPTOR 2K Bedliner Aerosol offers a fast, easy way to apply RAPTOR without compromising performance, no spray equipment necessary. This colored bed liner spray can is ideal for spot repairs and small jobs. More than just a bed liner, RAPTOR is a highly durable and tough protective coating.

Raptor 2K Protective Coating

This video will be the first of a five-part series, which covers the RAPTOR Protective Coatings System by U-POL.

U-POL offers a full system of RAPTOR protective coatings that are available in National Rule and low VOC formulations.

RAPTOR is the market-leading tough, durable, 2K coating for use as a truck bed-liner or as a full exterior protective coating that can be tinted any color.

  • It’s resistant to gas, diesel, hydraulic oils, acids, and animal urines, and is highly UV-resistant.
  • With RAPTOR, it’s possible to create multiple finishes from smooth to textured over a wide range of surfaces
  • And, RAPTOR provides superior protection and is used across multiple industries, including automotive, commercial, agricultural and construction machinery.

Learn more at www.raptorcoatings.com

Raptor Protective Coatings by U-POL – Wheel Restoration

RAPTOR Protective Coatings can be used on a variety of substrates in multiple industries and is available in National Rule and low VOC formulations . In this video we will demonstrate how to perform wheel restoration covering how to prep and restore wheel rims.

Featured Products

WIPE#6 SOLVENT BASED DEGREASER

RAPTOR Acid Etch Primer – UP5023

Raptor 2K Anti-Corrosive Epoxy Primer Aerosol – UP4842

1 US Quart Raptor Kit – UP4801

Professional Application Gun – UP4880

EU Declaration of Conformity – Overalls
EU Declaration of Conformity – Masks
EU Declaration of Conformity – Tigerseal Gloves
RAPTOR UV Resistance
RAPTOR ASTM Test Summary
RAPTOR Indicative Consumption
RAPTOR Professional Vari-Nozzle Application Gun
RAPTOR on Bricks
RAPTOR on Ceramic
RAPTOR on Chipboard
RAPTOR on Concrete
RAPTOR on Decking
RAPTOR on GRP
RAPTOR on Hardwood
RAPTOR on MDF
RAPTOR on Plasterboard
RAPTOR on Plywood
RAPTOR on PVC
RAPTOR on Softwood
RAPTOR on Stainless Steel
RAPTOR Traction
REP/5LK TDS

Anti-Corrosive Epoxy Primer

TDStds
REP/1LK TDS

Anti-Corrosive Epoxy Primer

TDStds
RLTRC/SM TDS

Traction Slip Resistant Additive

TDStds
RPTAP/AL TDS

Adhesion Promoter

TDStds
RPTEP/AL TDS

Acid Etch Primer

TDStds
RLH/5 TDS

5 Litre RAPTOR – Tough Protective Coating

TDStds
RLT/5 TDS

5 Litre RAPTOR – Tough Protective Coating

TDStds
RLB/5 TDS

5 Litre RAPTOR – Tough Protective Coating

TDStds
RLW/S4 TDS

4 Bottle Kit

TDStds
RLT/S4 TDS

4 Bottle Kit

TDStds
RLB/S4 TDS

4 Bottle Kit

TDStds
Spotlight on SPOT3
Construction Leaflet
RAPTOR Anti-Corrosive Epoxy Primer
Raptor 2K Bedliner
Raptor 2K Epoxy Primer
Raptor Traction
System 20 Primers Brochure
UPOL Catalogue
Raptor New Products
ISOPON Catologue
DOLPHIN Catalogue
Premium Aerosols Catalogue
RAPTOR Catalogue
2K Aerosol Full Process

Learn how to use the Raptor 2K Bedliner in Aerosol in a few steps

RAPTOR Acid Etch Primer

Raptor Acid Etch Primer in Aerosol – Prepare Your Substrate before Applying RAPTOR.

RAPTOR Adhesion Promoter

Raptor Adhesion Promoter in Aerosol – Prepare Your Substrate before Applying RAPTOR.

RAPTOR 1K Multi Use Protective Coating

RAPTOR Multi-Use Protective Coating protects a variety of surfaces from impact, scratches, corrosion and water damage. Ideal for vehicles, trailers, railings, stairs, metal furniture and more…

Professional adjustable Nozzle Gun

RAPTOR Vari-Gun Application Gun

Roller Application

RAPTOR Roll-On Application (Bed Liner and Protective Coating)

RLT/S1 TDS

1 Bottle Kit

TDStds
RLB/S1 SDS 2

1 Bottle Kit

SDSsds
RLB/S1 SDS

1 Bottle Kit

SDSsds
RLB/S1 TDS

1 Bottle Kit

TDStds
REP/AL TDS

RAPTOR 2K Anti-Corrosive Epoxy Primer Aerosol

TDStds
REP/AL SDS

RAPTOR 2K Anti-Corrosive Epoxy Primer Aerosol

SDSsds
RLB/AL TDS

RAPTOR 2K Aerosol Protective Coating

TDStds
RLB/AL SDS

RAPTOR 2K Aerosol Protective Coating

SDSsds
QW333L/1 TDS

333 Cutting Compound

TDStds
QW333L/1 SDS

333 Cutting Compound

SDSsds
QW333/ST SDS

333 Cutting Compound

SDSsds
QW333/ST TDS

333 Cutting Compound

TDStds
QW335/1 TDS

335 High Gloss Final Glaze

TDStds
QW335/1 SDS

335 High Gloss Final Glaze

SDSsds
QW334/1 TDS

334 Fine Finishing Compound

TDStds
QW334/1 SDS

334 Fine Finishing Compound

SDSsds
TIG/BW SDS

TIGER SEAL Polyurethane Sealant And Adhesive

SDSsds
TIG/BW TDS

TIGER SEAL Polyurethane Sealant And Adhesive

TDStds
TIG/GG TDS

TIGER SEAL Polyurethane Sealant And Adhesive

TDStds
TIG/GG SDS

TIGER SEAL Polyurethane Sealant And Adhesive

SDSsds
TIG/NB TDS

TIGER SEAL Polyurethane Sealant And Adhesive

TDStds
TIG/NB SDS

TIGER SEAL Polyurethane Sealant And Adhesive

SDSsds
SH9042 SDS

STRONGHOLD 904

SDSsds
SH904 TDS

STRONGHOLD 904

TDStds
SH9042 SDS 2

STRONGHOLD 904

SDSsds
SH9022 TDS

STRONGHOLD 902

TDStds
SH9022 SDS

STRONGHOLD 902

SDSsds
Spray RAPTOR to a prepared OEM Truck Bed

#1: Ensure you apply an even coat, avoiding excessive build in corners.
#2: For the first coat, we set up the RAPTOR Gun at 3.5 – 4 BAR, at 20 inches from the substrate.
#3: To ensure an even application, increase the pressure to 4.5 – 5 BAR, at 25 inches for the 2nd coat.
#4: Once dry, the vehicle may be carefully unmasked.

Don’t miss out our TOP TIPS!

RAPTOR a Chassis

#1: Remove as much rust and debris as possible with a coarse abrasive or grinder.
#2: Degrease with a solvent-borne degreaser such as WIPE#6 or System 20.
#3: U-POL recommends 2-3 coats of Epoxy Primer for a maximum anti-corrosive protection.
#4: Allow 10 minutes between coats.
#5: Once cured, apply RAPTOR. You can go wet-on-wet (no sanding) within 1 hour.

Don’t miss out our TOP TIPS!

RAPTOR a Bumper

#1: Degrease the substrate with a water-based System 20 degreaser.
#2: Abrade with 180-240 grit.
#3: Degrease again.
#4: Wipe the substrate with a tack rag.
#5: After 20 mins, you are ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

RAPTOR Bonnet and add a Stencil

#1: Spray the vehicle in the colour and texture of your choice.
#2: Once fresh RAPTOR has cured, lay the stencil over the area and press down firmly.
#3: Paint your stencil.
#4: To achieve a fine / flat texture, use a 1.6mm tip with RAPTOR thinned at 20% with our SYSTEM 20 fast thinner.
#5: Allow RAPTOR to dry.
#6: Demask after RAPTOR has cured.

Don’t miss out our TOP TIPS!

RAPTOR a Wheel

#1: Remove the wheel from the vehicle.
#2: Use a pressure washer to thoroughly clean the wheel. Remove all dirt, grime and break dust from both sides.
#3: Remove any wheel weights attached to the wheel.
#4: Tape valve stems so they don’t get caught with Raptor in the application process.
#5: Degrease to remove any road tar, contaminants and oil residues.
#6: Sand with 180-220 grit sand paper and a red scuff pad, getting down to OEM.
#7: Use a red scuff pad to get into all contour areas of the wheel.
#8: Blow off and reclean with degreaser.
#9: Use small 2″ pieces of tape to mask off tyre and protect it from overpsray. Continue the masking process around the outside edges of the wheel.
#10: For corrosion protection and additional adhesion, use a primer. We recommend 2 coats of Raptor 2K Epoxy Primer (REP/AL), Raptor Acid Etch Primer (RPTEP/AL) or U-POL Acid Etch Primer (ACID/AL). Cover any area where bare metal has been exposed.
#11: Apply a 1st coat of Raptor @ 4 bar and about 32″ from the surface.
#12: Apply the 2nd coat at 45° angle, opposite from the 1st spray.

Don’t miss out our TOP TIPS!

RAPTOR Raptor

#1: We need to repair a dent in RAPTOR.
#2: Take off the part which needs to be repaired if you can.
#3: Panel beat the dented area, so that the panel is easier to repair.
#4: Thoroughly degrease the area to be repaired prior to sanding.
#5: Remove RAPTOR from the damaged area with 80 to 120 grit abrasive.
#6: Thoroughly blow off the area and degrease again.
#7: Apply your filler to the damaged area.
#8: Sand to shape when dry with grit 120 to start and finish off with 180.
#9: Abrade the surrounding area which is to be recoated with a fine scuff pad and degrease.
#10: Any bare metal areas should be treated with an appropriate primer.
#11: Apply a light coat of RAPTOR Adhesion Promoter over the area which has been abraded with a scuff pad for optimum adhesion.
#12: Apply a light coat of RAPTOR over the repair area to achieve the required texture.
#13: If using RAPTOR 2K Aerosol, wait for 30 mins and apply a second even coat to achieve a uniform repair. If using a gun, wait for 1 hour.

Don’t miss out our TOP TIPS!

Achieve a Variety of Textures

Many textures can be achieved by changing the pressure, distance away from the panel or speed of application.

SH706/1 TDS

STRONGHOLD Smooth High Adhesion Body Filler for Plastics

TDStds
SH706/1 SDS

STRONGHOLD Smooth High Adhesion Body Filler for Plastics

SDSsds
SH9011 TDS

STRONGHOLD 901

TDStds
SH9011 SDS 2

STRONGHOLD 901

SDSsds
SH9011 SDS

STRONGHOLD 901

SDSsds
SH9012 TDS

STRONGHOLD 901

TDStds
SH9012 SDS 2

STRONGHOLD 901

SDSsds
SH9012 SDS

STRONGHOLD 901

SDSsds
SH9151 SDS

STRONGHOLD 915

SDSsds
SH9151 SDS 2

STRONGHOLD 915

SDSsds
SH9151 TDS

STRONGHOLD 915

TDStds
SH9152 SDS

STRONGHOLD 915

SDSsds
SH9152 SDS 2

STRONGHOLD 915

SDSsds
SH9152 TDS

STRONGHOLD 915

TDStds
PLAS/B TDS

PLAST X Bumper Repair B (Rigid)

TDStds
PLAS/B SDS 2

PLAST X Bumper Repair B (Rigid)

SDSsds
PLAS/B SDS

PLAST X Bumper Repair B (Rigid)

SDSsds
PK1 SDS

PLASTIKIT Professional Resin & Glass Fibre Repair Kit

SDSsds
PK1 TDS

PLASTIKIT Professional Resin & Glass Fibre Repair Kit

TDStds
PK1 SDS 2

PLASTIKIT Professional Resin & Glass Fibre Repair Kit

SDSsds
PLAS/A TDS

PLAST X Bumper Repair A (Semi-Rigid)

TDStds
PLAS/A SDS

PLAST X Bumper Repair A (Semi-Rigid)

SDSsds
CCFOWP/AL TDS

Fill-One Aerosols

TDStds
CCFOWP/AL SDS

Fill-One Aerosols

SDSsds
CCFOUP/AL TDS

Fill-One Aerosols

TDStds
CCFOUP/AL SDS

Fill-One Aerosols

SDSsds
Mix Black Raptor Kits

#1: Shake the Raptor black bottle thoroughly.
#2: For the 1 Bottle Kit, pour the full contents of the hardener into the RAPTOR bottle.
#3: For the 4 Bottle Kit, use the mixing cup provided.
#4: Replace lid and shake for 2 mins.
#5: Screw the application gun onto the RAPTOR bottle.

Don’t miss out our TOP TIPS!

Tint with 2K Solid Colour

#1: Shake the Raptor bottle thoroughly.
#2: For the 1 US Quart Kit, pour the full contents of the hardener into the RAPTOR bottle. For the 1 US Gallon Kit, pour RAPTOR Tintable into a mixing cup.
#3: Pour the hardener up to the measuring line in the mixing cup (8 fl. oz. of hardener for 24 fl. oz. of RAPTOR).
#4: Then pour the hardener in the RAPTOR bottle.
#5: Replace the lid and shake again to remove any excess of RAPTOR left in the bottle
#6: Activate your 2K paint with its own hardener.
#7: Using a measuring cup, add a maximum of 10% of your activated solid color by volume.
#8: Add your pre-activated tint to the RAPTOR.
#9: Mix all together for 2 mins.
#10: Once thoroughly mixed, pour back into the bottle.
#11: Shake again.

Don’t miss out our TOP TIPS!

Mix with Traction Slip Resistant Additive

#1: For the 4 Bottle Kit, pour hardener up to the measuring line in the mixing cup (240ml of hardener for 710ml of RAPTOR).
#2: Shake your RAPTOR Bottle thoroughly.
#3: Pour your hardener into the Raptor bottle.
#4: Add a full bag of RAPTOR Traction slip resistant additive to the RAPTOR bottle.
#5: Replace the lid on the bottle and shake for 2 mins.
#6: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

Mix Tintable Kits

#1: Shake the RAPTOR Tintable bottle thoroughly.
#2: For the 1 Bottle Kit, pour the full contents of the hardener into the RAPTOR Bottle.
#3: For the 4 Bottle Kit, pour RAPTOR Tintable into a mixing cup, and the hardener in the RAPTOR coating Bottle.
#4: Shake again.
#5: With the tint of your choice, add a maximum of 10% by volume.
#6: If tinting outside of the bottle, pour the RAPTOR into the mixing vessel.
#7: Pour the measured hardener into the empty RAPTOR bottle and shake to remove untinted RAPTOR excess from the bottle.
#8: Pour it back into the mixing vessel.
#9: Mix thoroughly again.
#10: Pour it back into the bottle, replace the lid and shake.

Don’t miss out our TOP TIPS!

Achieve Grey Shades

#1: Place the empty mixing cup on the scale.
#2: Shake RAPTOR White and Black bottles for 2 mins.
#3: Measure the required amounts of black and white RAPTOR into the mixing cup by weight for colour consistency.
#4: Mix thoroughly.
#5: Introduce the hardener to the mix and mix all together for 2 mins.
#6: Once thoroughly mixed, return to the bottle.
#7: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

CCMFILLE TDS

Custom Can Electric Multi Fill Machine

TDStds
CCWP/AL SDS

Custom Can Aerosols

SDSsds
CCWP/AL TDS

Custom Can Aerosols

TDStds
CCUP/AL SDS

Custom Can Aerosols

SDSsds
CCUP/AL TDS

Custom Can Aerosols

TDStds
Personal Protective Equipment Needed

Personal protective equipment: latex or nitrile gloves, safety glasses, protective overalls and an appropriate spray mask suitable for automotive paint application.

Prepare a Truck Bed

#1: Degrease to remove any contaminants, wax and grease
#2: Abrade the entire truck bed with 120-180 grit or a nylon cup brush.
#3: Using compressed air, remove any excess dust.
#4: Degrease the substrate with a solvent-based System 20 degreaser.
#5: For an anti-slip coating, add one bag of RAPTOR Traction per bottle.
#6: Directly apply RAPTOR.

Don’t miss out our TOP TIPS!

PCPG/AL TDS

Power Can High Build Primer

TDStds
PCPG/AL SDS

Power Can High Build Primer

SDSsds
Prepare Filler

#1: Perform your repair.
#2: Once you are happy with it, remove any coarse scratches with 180 grit.
#3: Thoroughly degrease the area.
#4: Mask surrounding area.
#5: Treat bare metal areas with RAPTOR Etch Primer. Apply a High Build Automotive Primer if required.
#6: Once dried, unmask.
#7: Sand the repair area with 320 grit abrasive.
#8: Degrease with a solvent-based degreaser like Wipe#6 or System 20.
#9: Apply RAPTOR according to TDS.

Don’t miss out our TOP TIPS!

Prepare OEM Paint

#1: Begin by washing the surface with soap and water to remove organic contaminates. Thoroughly degrease the substrate with a solvent-based degreaser such as U-POL WIPE#6 or System 20. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade with P180.
#3: Any hard to reach areas should be abraded by hand with a red scuff pad.
#4: Once abraded, thoroughly degrease again.
#5: Wipe the substrate with a tack rag.
#6: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

PCLC/AL SDS

Power Can Clearcoat

SDSsds
PCLC/AL TDS

Power Can Clearcoat

TDStds
Prepare Plastic with OEM Paint On

#1: Thoroughly wash with soap and water. Degrease the substrate with System 20 solvent or water borne degreaser. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade the substrate with 180-320 grit.
#3: Any hard to reach areas should be abraded by hand with a red medium scuff pad.
#4: Once abraded, blow off with compressed air and thoroughly degrease with water based degreaser.
#5: Wipe the substrate with a tack rag.
#6: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

Prepare Bare Plastic

#1: Thoroughly degrease the substrate with a water-based System 20 degreaser. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade bare plastic with 180-240 grit.
#3: Any hard to reach areas should be abraded by hand with a fine scuff pad.
#4: Once abraded, thoroughly degrease again with a water-based degreaser.
#5: Wipe the substrate with a tack rag.
#6: You are now ready to shoot RAPTOR.

Don’t miss out our TOP TIPS!

PCSB/AL TDS

Power Can Topcoat Colour

TDStds
PCSB/AL SDS

Power Can Topcoat Colour

SDSsds
PCMB/AL TDS

Power Can Topcoat Colour

TDStds
PCMB/AL SDS

Power Can Topcoat Colour

SDSsds
PCGW/AL TDS

Power Can Topcoat Colour

TDStds
PCGW/AL SDS

Power Can Topcoat Colour

SDSsds
Prepare Aluminium, Bare Metal, Galvanised Steel

#1: Thoroughly degrease the substrate with a solvent-based degreaser: U-POL WIPE#6 or System 20. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade aluminium, bare steel or galvanised with 180 grit.
#3: Once abraded, degrease again.
#4: Wipe the substrate with a tack rag. You are now ready to apply RAPTOR 2K Epoxy Primer.
#5: Read the instructions leaflet contained on the lid of the aerosol.
#6: After 24 hours, abrade with 400 grit before top coated.

Don’t miss out our TOP TIPS!

PCGB/AL TDS

Power Can Topcoat Colour

TDStds
PCGB/AL SDS

Power Can Topcoat Colour

SDSsds
Prepare Rust

#1: Remove all loose rust or flaky material with a coarse abrasive or a grinder.
#2: Use a sander to remove any light rust or surface rust with coarse abrasive like 60-80 grit to remove any imperfections.
#3: Once abraded, thoroughly degrease.
#4: Activate and apply RAPTOR Epoxy Primer according to TDS.
#5: 2-3 coats should be applied, with a gun, an aerosol or a roller.
#6: From 60 mins after application of the final coat, up to 7 days, the Epoxy Primer can be directly overcoated with RAPTOR.

Don’t miss out our TOP TIPS!

PCEP/AL SDS

Power Can Etch Primer

SDSsds
PCEP/AL TDS

Power Can Etch Primer

TDStds
Electric Multi Fill Machine – Instructions Video

Electric Multi Fill Machine Instructions Video

Electric Multi Fill Machine – How to change the Pump

Electric Multi Fill Machine – How To Change The Pump

PLAS/5SB SDS

PLAST X Trim Top Coat

SDSsds
PLAS/5SB TDS

PLAST X Trim Top Coat

TDStds
PLAS/5MG SDS

PLAST X Trim Top Coat

SDSsds
PLAS/5MG TDS

PLAST X Trim Top Coat

TDStds
PLAS/5LG SDS

PLAST X Trim Top Coat

SDSsds
PLAS/5LG TDS

PLAST X Trim Top Coat

TDStds
PLAS/5DG TDS

PLAST X Trim Top Coat

TDStds
PLAS/5DG SDS

PLAST X Trim Top Coat

SDSsds
PLAS/5BG TDS

PLAST X Trim Top Coat

TDStds
PLAS/5BG SDS

PLAST X Trim Top Coat

SDSsds
PLAS/5B TDS

PLAST X Trim Top Coat

TDStds
PLAS/5B SDS

PLAST X Trim Top Coat

SDSsds
PLAS/4F TDS

PLAST X Texture Coating

TDStds
PLAS/4F SDS

PLAST X Texture Coating

SDSsds
PLAS/4C TDS

PLAST X Texture Coating

TDStds
PLAS/4C SDS

PLAST X Texture Coating

SDSsds
PLAS/3HB TDS

PLAST X High Build Plastic Primer Filler

TDStds
PLAS/3HB SDS

PLAST X High Build Plastic Primer Filler

SDSsds
PLAS/3 SDS

PLAST X Plastic Primer Filler

SDSsds
PLAS/3 TDS

PLAST X Plastic Primer Filler

TDStds
PLAS/2 TDS

PLAST X Plastic Adhesion Promoter

TDStds
PLAS/2 SDS

PLAST X Plastic Adhesion Promoter

SDSsds
PLAS/1 SDS

PLAST X Plastic Pre-Cleaner

SDSsds
PLAS/1 TDS

PLAST X Plastic Pre-Cleaner

TDStds
TRIMSTWAL TDS

TRIM#11 High Build Topcoat

TDStds
TRIMSTW/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMSLW/AL TDS

TRIM#11 High Build Topcoat

TDStds
TRIMSLW/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMGW/AL TDS

TRIM#11 High Build Topcoat

TDStds
TRIMSB/AL TDS

TRIM#11 High Build Topcoat

TDStds
TRIMSB/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMGB/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMMB/AL TDS

TRIM#11 High Build Topcoat

TDStds
TRIMMB/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMGW/AL SDS

TRIM#11 High Build Topcoat

SDSsds
TRIMGB/AL TDS

TRIM#11 High Build Topcoat

TDStds
GUARD/AL TDS

GUARD#10 Gravi-Gard Stone Chip Protector

TDStds
GUARD/AL SDS

GUARD#10 Gravi-Gard Stone Chip Protector

SDSsds
BLEND/AL TDS

BLEND#9 Fade Out Solvent

TDStds
BLEND/AL SDS

BLEND#9 Fade Out Solvent

SDSsds
ACID/AL SDS

ACID#8 1K Acid Etch Primer

SDSsds
ACID/AL TDS

ACID#8 1K Acid Etch Primer

TDStds
GUIDE/AL SDS

GUIDE#7 Dry Guide Coat

SDSsds
GUIDE/AL TDS

GUIDE#7 Dry Guide Coat

TDStds
WIPE/AL SDS

WIPE#6 Solvent-Based Degreaser

SDSsds
WIPE/AL TDS

WIPE#6 Solvent-Based Degreaser

TDStds
HIGHDG/AL SDS

HIGH#5 High Build Primer Filler

SDSsds
HIGHDG/AL TDS

HIGH#5 High Build Primer Filler

TDStds
HIGHW/AL SDS

HIGH#5 High Build Primer Filler

SDSsds
HIGHW/AL TDS

HIGH#5 High Build Primer Filler

TDStds
HIGHG/AL SDS

HIGH#5 High Build Primer Filler

SDSsds
HIGHG/AL TDS

HIGH#5 High Build Primer Filler

TDStds
HIGHB/AL SDS

HIGH#5 High Build Primer Filler

SDSsds
HIGHB/AL TDS

HIGH#5 High Build Primer Filler

TDStds
GRIP/AL SDS

GRIP#4 1K Universal Adhesion Promoter

SDSsds
GRIP/AL TDS

GRIP#4 1K Universal Adhesion Promoter

TDStds
SPOT/AL SDS

SPOT#3 Universal Spot Primer

SDSsds
SPOT/AL TDS

SPOT#3 Universal Spot Primer

TDStds
WELD/AL TDS

WELD#2 Weld Through Primer

TDStds
WELDC/AL SDS

WELD#2 Weld Through Primer

SDSsds
WELDC/AL TDS

WELD#2 Weld Through Primer

TDStds
WELD/AL SDS

WELD#2 Weld Through Primer

SDSsds
CLEAR/AL SDS

CLEAR#1 UV Resistant Clearcoat

SDSsds
CLEAR/AL TDS

CLEAR#1 UV Resistant Clearcoat

TDStds
GS/1 TDS

GREY STRIPE Brushable Seam Sealer

TDStds
GS/1 SDS

GREY STRIPE Brushable Seam Sealer

SDSsds
GRA/GG1 SDS

GRAVITEX PLUS HS Stone Chip Protector

SDSsds
GRA/NB1 TDS

GRAVITEX PLUS HS Stone Chip Protector

TDStds
GRA/NB1 SDS

GRAVITEX PLUS HS Stone Chip Protector

SDSsds
GRA/BW1 TDS

GRAVITEX PLUS HS Stone Chip Protector

TDStds
GRA/BW1 SDS

GRAVITEX PLUS HS Stone Chip Protector

SDSsds
GRA/GG1 TDS

GRAVITEX PLUS HS Stone Chip Protector

TDStds
BAR/1 TDS

BARCOAT Quick Drying Isolator

TDStds
BAR/1 SDS

BARCOAT Quick Drying Isolator

SDSsds
S2002/5 SDS

S2002 Solvent Based Degreaser

SDSsds
S2002/5 TDS

S2002 Solvent Based Degreaser

TDStds
S2002/1 SDS

S2002 Solvent Based Degreaser

SDSsds
S2002/1 TDS

S2002 Solvent Based Degreaser

TDStds
S2001/5 TDS

S2001 Solvent Based Degreaser

TDStds
S2001/5 SDS

S2001 Solvent Based Degreaser

SDSsds
S2005EV/M TDS

S2005EV Voc Compliant Clearcoat Accelerator

TDStds
S2005EV/M SDS

S2005EV Voc Compliant Clearcoat Accelerator

SDSsds
S2003/1 SDS

S2003 Plastic Primer Adhesion Promoter

SDSsds
S2003/1 TDS

S2003 Plastic Primer Adhesion Promoter

TDStds
S20FISH/S SDS

Fisheye Eliminator Anti-Silicone Additive

SDSsds
S20FISH/S TDS

Fisheye Eliminator Anti-Silicone Additive

TDStds
S20ROC/M TDS

Rocket Paint Accelerator

TDStds
S20ROC/M SDS

Rocket Paint Accelerator

SDSsds
ROC/S SDS

Rocket Paint Accelerator

SDSsds
ROC/S TDS

Rocket Paint Accelerator

TDStds
S2000/5 TDS

S2000 Water Based Degreaser

TDStds
S2000/5 SDS

S2000 Water Based Degreaser

SDSsds
S2046/5 TDS

S2046 Slow Drying Universal Thinner

TDStds
Go to Top